No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mw

mw

Function

The mw command is used to write the memory by byte, word, and long word.

Format

mw [.b, .w, .l] address value [count]

Parameters

Parameter

Description

Value

addres

Memory address to be written.

Enter the value as required.

value

Value to be written.

Enter the value as required.

count

Count of writes to be performed.

Enter the value as required.

Modes

serial port mode

Usage Guidelines

None

Example

Write the memory by long word.

Hi1710_UBOOT> mw.l 0x82000000 11 1

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 504354

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next