No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
uboot0_up

uboot0_up

Function

The uboot0_up command is used to upgrade the U-Boot.

Format

uboot0_up

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Upgrade the U-Boot.

Hi1710_UBOOT> uboot0_up 
tftp server IP:192.168.0.2 
BMC board  IP:192.168.0.1 
file name:u-boot.bin 
TFTP from server 192.168.0.2; our IP address is 192.168.0.1 
Filename 'u-boot.bin'. 
Load address: 0x8b000000 
Loading: *############### 
done 
Bytes transferred = 215792 (34af0 hex) 
Un-Protect Flash Bank # 1 
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the PCB cannot work normally. 

erase flash from :40000000 to :4007ffff,please wait a while 

.... done 
Erased 4 sectors 
Copy u-boot to flash,please wait a while 
 9....8....7....6....5....4....3....2....1....Clean env from flash,please wait a while 
 erase flash from :401e0000 to :401fffff,please wait a while 

. done 
Erased 1 sectors 
Protect Flash Sectors 0-15 in Bank # 1 


Success to load u-boot0.please update uboot0 and uboot1 in a uboot update process.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 502556

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next