No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
phyctl

phyctl

Function

The phyctl command is used to enable or disable a port in serial port mode.

Format

phyctl switch log_phyid

Parameters

Parameter

Description

Value

switch

Enables or disables a phy.

The value can be "0" or "1", a hexadecimal value is also supported. where:

  • "0": indicates that the port is disabled.
  • "1": indicates that the port is enabled.

log_phyid

Phy ID.

For disk enclosures and storage devices integrating disks and controllers, the value ranges from 0 to 35. If the value is greater than or equal to 36, all phys will be operated by default. A hexadecimal value is also supported. The values are described as follows:

  • "0": phy 0
  • "1": phy 1
  • "2": phy 2
  • "3": phy 3
  • "4": phy 4
  • "5": phy 5
  • "6": phy 6
  • "7": phy 7
  • "8": phy 8
  • "9": phy 9
  • "10": phy 10
  • "11": phy 11
  • "12": phy 12
  • "13": phy 13
  • "14": phy 14
  • "15": phy 15
  • "16": phy 16
  • "17": phy 17
  • "18": phy 18
  • "19": phy 19
  • "20": phy 20
  • "21": phy 21
  • "22": phy 22
  • "23": phy 23
  • "24": phy 24
  • "25": phy 25
  • "26": phy 26
  • "27": phy 27
  • "28": phy 28
  • "29": phy 29
  • "30": phy 30
  • "31": phy 31
  • "32": phy 32
  • "33": phy 33
  • "34": phy 34
  • "35": phy 35
  • "36" or greater: all phys.

Modes

serial port mode

Usage Guidelines

  • This command is applicable to 12 Gbit/s SAS disk enclosures and storage devices integrating disks and controllers.
  • Execute this command with caution when there are ongoing services because this command may incorrectly disable ports, thereby impairing service running.

Example

Run the "phyctl 1 1" command to enable port 1 in serial port mode.

PANGEA_SES:> phyctl 1 1

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 502140

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next