No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain pause_schedule_leveling

change disk_domain pause_schedule_leveling


The change disk_domain pause_schedule_leveling command is used to suspend the scheduling of new leveling tasks on the local controller within a specified period of time.


change disk_domain pause_schedule_leveling time=?






Time of new leveling task suspension, expressed in hours.

The value is an integer ranging from 0 to 240.


Developer view

Usage Guidelines



Suspend the scheduling of new leveling tasks within 1 hour.

developer:/>change disk_domain pause_schedule_leveling time=1 
CAUTION: You are about to suspend the scheduling of new leveling tasks on the local controller . 
This command is used to prevent the startup of new balancing tasks on the local controller within the specified time. If you want to prevent the startup of new balancing tasks in the entire system, run this command on all controllers. 
Suggestion: Before running this command, determine whether the startup of new balancing tasks on the local controller needs to be prevented. 
Do you wish to continue?(y/n)y 
Command executed successfully. 

System Response


Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 497607

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next