No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
os setibcpassword

os setibcpassword


The os setibcpassword command is used to change the password of user ibc_os_hs for a data switch.


os setibcpassword




Diagnostic view

Usage Guidelines

  • The new password for a data switch must be the same as that of user ibc_os_hs for the engine.
  • The passwords for the two data switches must be changed simultaneously, and the new passwords must be the same. Otherwise, system communication may be abnormal.


Change the password of user ibc_os_hs for a data switch.

_super_admin:/diagnose>os setibcpassword 
New password: 
Reenter new password: 
Old password:

System Response


Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 503012

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next