No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tgt gethostidlist

tgt gethostidlist

Function

The tgt gethostidlist command is used to query the number and ID list of hosts mapped to the current controller.

Format

tgt gethostidlist

Parameters

None

Views

Diagnostic view

Usage Guidelines

The tgt gethostidlist command is used to query the number and ID list of hosts mapped to the current controller.

Example

Query the number and ID list of hosts mapped to the current controller.

admin:/diagnose>tgt gethostidlist 
CurNode Host num ( 1). 
CurNode hostId List: 
HostId (0). 

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138389

Views: 502388

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next