No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show devicemanager dos_whitelist

show devicemanager dos_whitelist


The show devicemanager dos_whitelist command is used to query the IP addresses in the anti-DoS attack whitelist.


show devicemanager dos_whitelist





Usage Guidelines

After this operation, the IP addresses in the current anti-DoS attack whitelist will be displayed on the terminal.


Show the IP addresses in the current anti-DoS attack whitelist.

admin:/>show devicemanager dos_whitelist 
Command is executable now. 
admin:/>show devicemanager dos_whitelist 
IP List 

System Response

The following table describes the parameter meanings.



IP List

IP address in the anti-DoS attack whitelist.

Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 235477

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next