No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create schedule monitor

create schedule monitor

Function

The create schedule monitor command is used to create SmartTier I/O monitoring policies. The data recorded by I/O monitoring policies can be used as a reference for formulating data relocation policies.

Format

create schedule monitor name=? pool_id=? period=? [ day_of_week=? ] [ start_time=? ] [ duration=? ]

Parameters

Parameter

Description

Value

name=?

Name of an I/O monitoring policy.

The value contains 1 to 31 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

pool_id=?

ID of a storage pool that you want to monitor.

To obtain the value, run "show storage_pool general".

period=?

Monitoring period.

The value can be:

  • "daily": The policy is executed daily.
  • "weekly": The policy is executed weekly.

day_of_week=?

Day on which I/O monitoring will be cycled weekly. This parameter must be assigned and it is valid only when period=? is set to "weekly".

You can specify multiple days in a week and separate them with commas (,). The value can be "sun", "mon", "tue", "wed", "thu", "fri", or "sat", where:

  • "sun": indicates Sunday.
  • "mon": indicates Monday.
  • "tue": indicates Tuesday.
  • "wed": indicates Wednesday.
  • "thu": indicates Thursday.
  • "fri": indicates Friday.
  • "sat": indicates Saturday.

start_time=?

Time from which I/O monitoring will be started on a specific day in a week.

The value is in the format of HH:MM. The value ranges from 00:00 to 23:59.

The default value is "00:00".

duration=?

Monitoring duration.

The value is in the format of HH:MM or H:M. The value ranges from 00:30 to 24:00.

The default value is "24:00".

Level

Administrator

Usage Guidelines

  • The prerequisite for running this command is that the selected storage pool contains at least two storage tiers.
  • I/O monitoring policies will regularly analyze the data stored in different tiers of the storage pool, and the resulted data will be used as a substantial reference for formulating data relocation policies.

Example

Create an I/O monitoring policy in storage pool "2", where the name of the policy is "newmonitor", and the policy will be started from "00:00" and lasts for "30" minutes on each Monday.

admin:/>create schedule monitor name=newmonitor pool_id=2 period=weekly day_of_week=mon start_time=00:00 duration=00:30 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 228516

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next