No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system_analysis

change file_system_analysis


The change file_system_analysis command is used to change the action status of file system analysis.


change file_system_analysis file_system_id=? action=?






File system ID.

The value ranges from 0 to 65535.


Action of file system analysis. If the action starts after being completed or stopped, the existing statistics are cleared and statistics are collected again. If the action is paused and then continued, statistics may be inaccurate. If file system analysis is started during SmartTier relocation, the statistics may be inaccurate and are just for your reference.

The value can be "start", "pause", "continue", or "stop", where:

  • "start": starts file statistics collection.
  • "pause": pauses file statistics collection.
  • "continue": continues file statistics collection.
  • "stop": stops file statistics collection.


Administrator,vstore admin

Usage Guidelines



Change the action status of file system analysis.

admin:/>change file_system_analysis file_system_id=1 action=start 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 236112

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next