No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create dr_star general

create dr_star general

Function

The create dr_star general command is used to create DR Star.

Format

create dr_star general disaster_recovery_strategy=? member_type=? asynchronous_remote_replication_id=? { hyper_metro_id=? | synchronous_remote_replication_id=? } name=? swap_strategy=? swap_silent_time=?

Parameters

Parameter

Description

Value

disaster_recovery_strategy

DR policy type.

The value can be "hyper_metro" or "synchronous_remote_replication", where:

  • "hyper_metro": HyperMetro network.
  • "synchronous_remote_replication": synchronous remote replication network.

Currently, only the HyperMetro network is supported.

member_type

Member type.

The value can be "pair" or "consistency_group", where:

  • "pair": pair.
  • "consistency_group": consistency group.

asynchronous_remote_replication_id

ID of an asynchronous remote replication member.

If member_type is pair, run "show remote_replication general" without parameters to obtain the value. Otherwise, run "show consistency_group general" without parameters to obtain the value.

hyper_metro_id

ID of a HyperMetro member.

If member_type is pair, run "show hyper_metro_pair general" without parameters to obtain the value. Otherwise, run "show hyper_metro_consistency_group general" without parameters to obtain the value.

synchronous_remote_replication_id

ID of a synchronous remote replication member.

If member_type is pair, run "show remote_replication general" without parameters to obtain the value. Otherwise, run "show consistency_group general" without parameters to obtain the value.

name

Dr Star name.

The value contains 1 to 31 characters including digits, letters, hyphens (-), underscores (_), and periods (.), and can only start with a digit or a letter.

swap_strategy

Switchover policy.

The value can be "manual" or "automatic", where:

  • "manual": manual switchover.
  • "automatic": automatic switchover.

The default value is "automatic".

swap_silent_time

Switchover silence time.

The value ranges from 0 to 30, expressed in minutes. The default value is 30 minutes.

Level

Administrator

Usage Guidelines

None

Example

Create DR Star and set the DR policy to "HyperMetro", member type to "Pair", asynchronous remote replication member ID to "1a212d4a5e6b0003", and HyperMetro member ID to "1a212d4a5e6b0002".

admin:/>create dr_star general disaster_recovery_strategy=hyper_metro member_type=pair asynchronous_remote_replication_id=1a212d4a5e6b0003 hyper_metro_id=1a212d4a5e6b0002 name=dr 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 237241

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next