No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hypervault general

show hypervault general


The show hypervault general command is used to query HyperVault.


show hypervault general [ hypervault_id=? ]






ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.



Usage Guidelines



  • Query basic information about existing HyperVault tasks.
    admin:/>show hypervault general 
     ID      Health Status Running Status Is Primary Local Resource ID  Remote Device ID  Remote Resource ID Recover Policy Backup Rate Local Resource Capacity remote Resource Capacity        Restore Rate Compress Enable       
    ----------  --------------  ---------------- ------------  -----------------  --------------- ----------------     ------------ ----------       --------------------     -----------------------        ------------- --------------- 
    20017929952   normal         split               yes              0                  1                  1               automatic       middle                    10.000 GB                10.000 GB                high             NO
  • Query details about the HyperVault task whose ID is "200799520000".
    admin:/>show hypervault general  hypervault_id=200799520000 
    ID                      : 200799520000 
    Health Status           : normal 
    Running Status         : split     
    Is Primary              : yes 
    Resource Type           : filesystem 
    Local Resource ID       : 0 
    Local Resource Name     : fs1 
    Remote Device ID        : 1 
    Remote Resource ID      : 1 
    Remote Resource Name : fs2 
    Recover Policy          : automatic 
    Backup Rate             : middle 
    Local Resource Capacity : 10.000 GB  
    remote Resource Capacity: 10.000 GB 
    Restore Rate            : high 
    Compress Enable         : NO

System Response

The following table describes the parameter meanings.




ID of the HyperVault object.

Health Status

Health status of HyperVault.

Running Status

Running status of HyperVault.

Is Primary

Whether it is the primary resource.

Resource Type

Type of the backup object.

Local Resource ID

Primary resource ID of the backup object.

Local Resource Name

Primary resource name of the backup object.

Remote Device ID

Remote device ID.

Remote Resource ID

Remote resource ID.

Remote Resource Name

Secondary resource name.

Recover Policy

Fault rectification policy.

Backup Rate

Backup rate.

Restore Rate

Restoration rate.

Local Resource Capacity

Local resource capacity.

remote Resource Capacity

Remote resource capacity.

Compress Enable

Whether to enable compression.

Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 235582

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next