No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change port_group general

change port_group general

Function

The change port_group general command is used to change the name of a port group.

Format

change port_group general { port_group_id=? | port_group_name=? } name=?

Parameters

Parameter

Description

Value

port_group_id=?

ID of a port group whose name you want to change.

To obtain the value, run "show port_group general".

port_group_name=?

Port group name.

To obtain the value, run "show port_group general".

name=?

New name of a port group.

The value contains 1 to 31 digits, letters, underscores (_), hyphens (-), and periods (.).

Level

Administrator

Usage Guidelines

None

Example

  • Change the name of port group "0" to "test120".
    admin:/>change port_group general port_group_id=0 name=test120 
    Command executed successfully.
  • Change the name of port group "portgroup1" to "test120".
    admin:/>change port_group general port_group_name=portgroup1 name=test120 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 236499

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next