No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show bond_port

show bond_port


The show bond_port command is used to query information about bonded ports.


show bond_port [ bond_port_id=? ]

show bond_port [ failover_group_id=? ]






ID of the bonded port.

To obtain the value, run "show bond_port" without parameters.


ID of the failover group. OceanStor 2200 V3 does not support this parameter.

The value is an integer from 0 to 8191.



Usage Guidelines

  • To query all bonded ports, run "show bond_port".
  • To query a specific bonded port, run "show bond_port bond_port_id=?".
  • To query bonded ports in a specified failover group, run "show bond_port failover_group_id=?".

The parameter bond_port_id and failover_group_id are mutually exclusive.


  • Query all bonded ports.
    admin:/>show bond_port 
    ID Name Health Status Running Status MTU Port ID List 
    -- ------- --------------- --------------- --------------- --------------- 
    0 newbond Normal Link Up 2000 ENG0.B1.P0,ENG0.B1.P1 
    1 newbond2 Normal Link Up 2000 ENG0.A1.P0,ENG0.A1.P1
  • Query the bonded ports in failover group "0".
    admin:/>show bond_port failover_group_id=0 
    ID Name Health Status Running Status MTU Port ID List 
    -- ------- --------------- --------------- --------------- --------------- 
    549772730113 test Normal Link up 3000 ENG0.B3.P0,ENG0.B3.P3

System Response

The following table describes the parameter meanings.




ID of the bonded port.

Port ID List

ID list of bonded ports that form the bond port.


Bond port name.

Health Status

Health status of the bond port.

Running Status

Running status of the bond port.


MTU of the bond port.

Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 234969

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next