No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete failover_group general

delete failover_group general

Function

The delete failover_group general command is used to delete a specified customized failover group.

Format

delete failover_group general failover_group_id=?

Parameters

Parameter

Description

Value

failover_group_id=?

ID of a failover group.

  • The value is an integer between 1 and 1024.
  • To obtain the value, run the "show failover_group general" command without parameters.

Level

Administrator

Usage Guidelines

  • Run the "show failover_group general" command to view the failover group ID.
  • Run the "delete failover_group failover_group_id=?" command to delete a specified customized failover group. Only customized failover groups are supported.

Example

Delete a specified customized failover group.

admin:/>delete failover_group general failover_group_id=1 
DANGER: You are about to delete a failover group. This operation will prevent member ports in the failover group from floating in user-defined mode. 
Suggestion: Before performing this operation, ensure that member ports in the failover group do not need to float in user-defined mode. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 228181

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next