No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port initiator

show port initiator

Function

Theshow port initiator command is used view the information of all initiators that map to a port.

Format

show port initiator port_type=? port_id=?

Parameters

Parameter

Description

Value

port_type=?

Port type.

The value can be "FC", "ETH", "BOND_PORT", "FCoE", or "IB", where:

  • "FC": Fibre Channel port.
  • "ETH": Ethernet port (including an iSCSI host port and management port).
  • "BOND_PORT": bond port.
  • "FCoE": FCoE port.
  • "IB": IB port.

port_id=?

ID of a port.

The value can be:

  • When the "port_type" value is "ETH", "FC", or "FCoE", you can run "show port general" without parameters to obtain the port ID.
  • When the "port_type" value is "BOND_PORT", you can run "show bond_port" to obtain the port ID.
  • When the "port_type" value is "IB", you can run "show ib_port general" to obtain the port ID.

Level

Guest

Usage Guidelines

None

Example

View information about all initiators that map to port "ENG0.B3.P0".

admin:/>show port initiator port_type=FC port_id=ENG0.B3.P0 

WWN  Running Status  Free  Alias  Host ID  Multipath Type  Failover Mode  Path Type  Special Mode Type vStore ID 
----------------  --------------  ----  -----  -------  --------------  -------------  ---------  ---------- --- 
2100373635343332  Online  Yes  --  --  Default  --  --  --  11

System Response

The following table describes the parameter meanings.

Parameter

Meaning

WWN

WWN of the FC initiator.

Running Status

Running status of the initiator.

Free

Use status of the initiator.

Alias

Alias of the initiator.

Host ID

ID of the host to which the initiator is added.

Multipath Type

Multipathing mode.

  • Default: Huawei multipathing software is used.
  • Third-party: Third-party multipathing software is used.

Failover Mode

Failover mode of the initiator.

  • Old ALUA: ALUA of an earlier version.
  • Common ALUA: common ALUA.
  • No ALUA: ALUA not used.
  • Special Mode: special mode.

Special Mode Type

Special mode type of the initiator.

  • Mode0: special mode 0.
  • Mode1: special mode 1.
  • Mode2: special mode 2.
  • Mode3: special mode 3.

Path Type

Path type of the initiator.

  • Optimized: optimized path.
  • Non-optimized: non-optimized path.

iSCSI IQN

iSCSI initiator IQN.

CHAP Enabled

Whether the iSCSI initiator enables the CHAP authentication.

CHAP User

CHAP authentication user of the iSCSI initiator.

vStore ID

ID of the vStore to which an initiator belongs.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 227917

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next