No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show assistant_cooling_unit

show assistant_cooling_unit


The show assistant_cooling_unit command is used to query details on assistant cooling unit.


show assistant_cooling_unit [ id=? ]






ID of assistant cooling unit

To obtain the value, run "show assistant_cooling_unit" without parameter.



Usage Guidelines

  • To query details on all assistant cooling unit, run "show assistant_cooling_unit".
  • To query details on a specific assistant cooling unit, run "show assistant_cooling_unit id=?".


  • To query details on all assistant cooling unit, run the following command. The command output varies depending on a specific product.
    admin:/>show assistant_cooling_unit 
    ID Health Status Running Status 
    ------- ------------- -------------- -------------------------------- 
    CTE0.C Normal Online 
    CTE0.D Normal Online
  • To query details on the assistant cooling unit whose ID is "CTE0.C", run the following command. The ID and output vary depending on a specific product.
    admin:/>show assistant_cooling_unit id=CTE0.C 
    ID : CTE0.C 
    Health Status : Normal 
    Running Status : Online 
    PCB Version : VER.B 
    Electronic Label : fan_ctrl_elabel

System Response


Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 237879

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next