No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear cifs connection

clear cifs connection

Function

The clear cifs connection command is used to close the CIFS connection of the specified client IP address or server IP address.

Format

clear cifs connection controller=? { server_ip=? | client_ip=? } [ port=? ]

Parameters

Parameter

Description

Value

controller

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

server_ip

Server IP address.

IPv4 or IPv6 address.

client_ip

Client IP address.

IPv4 or IPv6 address.

port

Port number.

The value is an integer ranging from 0 to 65535.

Level

Administrator

Usage Guidelines

None

Example

Close the CIFS connection.

admin:/>clear cifs connection controller=0A server_ip=10.46.23.120 
WARNING: You are about to disconnect the service network of the client. This operation will interrupt client services. 
Suggestion: Confirm that you know about the impact before running this command. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 228138

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next