No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fan_info general

change fan_info general


The change fan_info general command is used to set the basic speed level of fans in enclosures.


change fan_info general enclosure_id=? flag=? level=?






Enclosure ID.

To obtain the value, run "show enclosure" without parameters.


Flag indicating whether the setting is valid.

The value can be "enable" or "disable", where:

  • "enable": indicates that the speed adjustment is valid.
  • "disable": indicates that the speed adjustment is invalid.


Basic speed level of fans.

The basic speed level ranges from 8 to 32.



Usage Guidelines

You can set the basic speed level of fans in a specified enclosure by running the "change fan_info general enclosure_id=? flag=? level=?" command.


Set the basic speed level of fans to "12".

admin:/>change fan_info general enclosure_id=CTE0 flag=enable level=12 
WARNING: You are about to change the fan speed adjustment policy. This operation will improve the basic level of the original fan speed adjustment policy. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 234573

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next