No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ftds switch

show ftds switch

Function

The show ftds switch command is used to check whether the Flow Tracing & Diagnosing System (FTDS) function is enabled.

Format

show ftds switch

Parameters

None

Level

Guest

Usage Guidelines

Run this command to check whether the FTDS function is enabled. "On" indicates that the function is enabled. "Off" indicates that the function is disabled.

Example

  • Show the switch status of FTDS in the guest view.
    admin:/>show ftds switch 
    Switch: On 
    Trace Switch: Off 
    Phase Switch: On 
    Delay Switch: On 
    Count Switch: On
  • Show the switch status of FTDS in the developer view.
    developer:/>show ftds switch 
    Switch: On 
    Trace Switch: Off 
    Phase Switch: On 
    Delay Switch: On 
    Count Switch: On 
    Workload Switch: Off

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Switch

Main switch.

Trace Switch

Tracing switch.

Phase Switch

Phase switch.

Delay Switch

Delay switch.

Count Switch

Count switch.

Workload Switch

Workload collection switch.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 227892

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next