No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change share_ip_control cifs

change share_ip_control cifs

Function

The change share_ip_control cifs command is used to change a CIFS share IP control rule.

Format

change share_ip_control cifs rule_id=? rule=?

Parameters

Parameter

Description

Value

rule_id=?

Share IP control rule ID.

The value is an integer ranging from 0 to 18,446,744,073,709,551,615.

rule=?

IP control rule.

The parameter value contains 1 to 95 characters, and only hexadecimal digits,dot(.), colons (:), separators (/), and tilde (~) are allowed.

Level

Administrator

Usage Guidelines

None

Example

  • To query the status of a CIFS share IP control rule before the change, run the following command.
    admin:/>show share_ip_control cifs rule_id=1 
    Rule ID  : 1  
    Share ID : 4  
    Rule     : 192.168.192.1
  • To change a CIFS share IP control rule, run the following command.
    admin:/>change share_ip_control cifs rule_id=1 rule=192.168.192.2 
    Command executed successfully.
  • To query the status of a CIFS share IP control rule after the change, run the following command.
    admin:/>show share_ip_control cifs rule_id=1 
    Rule ID  : 1  
    Share ID : 4  
    Rule     : 192.168.192.2

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 227572

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next