No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show service ndmp

show service ndmp

Function

The show service ndmp command is used to query the NDMP configuration.

Format

show service ndmp

Parameters

None

Level

Guest

Usage Guidelines

None

Example

Query the NDMP configuration.

admin:/>show service ndmp 
Is Enabled:Yes 
User Name:ndmp 
Port:10000 
IP:192.168.0.1 
Restoring Quota(%):95 
Support Snapshot:Yes 
Version:4 
Ignore CTime:No 
Password Expired:No 
PIM Buffer(MB):250 
Prefetch Enable:Yes 
Readdir Plus Enable:Yes 
Data Connect Mode:1 
FS Global Scope:Off 
Ads Enable:Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Is Enabled

Whether to enable the NDMP service.

User Name

NDMP username.

Port

Port number.

IP

Listening IP address.

Restoring Quota(%)

Quota restored to the file system.

Support Snapshot

Whether to support snapshots.

Version

NDMP protocol version.

Ignore CTime

Whether to ignore ctime during backup.

Password Expired

Whether the password expires.

PIM Buffer(MB)

Buffer size on the PIM module.

Prefetch Enable

Whether to enable the prefetch function.

Readdir Plus Enable

Whether to enable the readdir plus function.

Data Connect Mode

Data connection is in LIF port mode.

FS Global Scope

Switch for enabling the vStore file system to be globally available.

Ads Enable

Whether to enable the ADS function.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 236626

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next