No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create failover_group general

create failover_group general


The create failover_group general command is used to create a customized failover group.


create failover_group general name=? [ service_type=? ]






Name of a failover group.

The value contains 1 to 63 characters, including digits, letters, underscores (_), hyphens (-), and periods (.) .


Failover group service type. The default service type is NAS.




Usage Guidelines

  • Run the "create failover_group general name=?" command to create a NAS service failover group with a specified name.
  • Run the "create failover_group general name=? service_type=SAN" command to create a SAN service failover group with a specified name.


  • Create a failover group named "group1" with the default NAS service type.
    admin:/>create failover_group general name=group1 
    Command executed successfully.
  • Create a failover group named "group2" with the SAN service type.
    admin:/>create failover_group general name=group2 service_type=SAN 
    Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 237623

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next