No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ldap configuration

change ldap configuration

Function

The change ldap configuration command is used to modify the configuration information about a domain authentication server.

Format

change ldap configuration { type=? | ip_list=? | port=? | over_ssl=? | base_dn=? | bind_dn=? | bind_password=? | user_search_path=? | group_search_path=? | user_id_attr=? | user_name_attr=? | group_id_attr=? | group_name_attr=? | group_member_attr=? | user_objectclass=? | group_objectclass=? } * [ server_id=? ]

Parameters

Parameter

Description

Value

type=?

Type of the LDAP server.

The value is case-insensitive and can be "LDAP" or "AD", where:

  • "LDAP": indicates the common OpenLDAP protocol.
  • "AD": indicates the Active Directory (AD) protocol.

ip_list=?

IP addresses of employed LDAP servers.

The value can be a maximum of four IP addresses separated by commas (,). You can access the LDAP server by using any of the listed IP addresses.

port=?

ID of the employed listening port on an LDAP server.

The value is an integer between 1 and 65535.

over_ssl=?

Whether to enable SSL communication for an LDAP server.

The value can be "yes" or "no", where:

  • "yes": The SSL function is used.
  • "no": The SSL function is not used.

The default value is "no".

base_dn=?

Base distinguished name (DN). This parameter defines a start point for searching on an LDAP directory server.

The value contains 1 to 255 characters and cannot contain slashes (/). The value is in the format of "cn=", "ou=", and "dc=" and can contain one, two, or three of them. If the value contains only "dc=", "dc=domain" is not supported.

bind_dn=?

DN bound with an LDAP server. If anonymous binding is not available for an LDAP server, you must bind DNs before you can retrieve the information on users or user groups.

The value contains 1 to 255 characters. The value is in the format of cn=, ou=, dc=.

bind_password=?

Password for a bound DN.

The value contains 1 to 63 characters.

user_search_path=?

LDAP directory server path under which users will be searched for.

The value contains 1 to 255 characters. The value is in the format of cn=, ou=, dc=.

group_search_path=?

LDAP directory server path under which user groups will be searched for.

The value contains 1 to 255 characters. The value is in the format of cn=, ou=, dc=.

user_id_attr=?

Attribute of a user ID.

The value contains 1 to 63 characters. The default value can be "uidNumber" or "uSNCreated", where:

  • "uidNumber" when type=? is set to LDAP.
  • "uSNCreated" when type=? is set to AD.

user_name_attr=?

Attribute of a user name.

The value contains 1 to 63 characters. The default value can be "uid" or "sAMAccountName", where:

  • "uid" when type=? is set to LDAP.
  • "sAMAccountName" when type=? is set to AD.

group_id_attr=?

Attribute of a user group ID.

The value contains 1 to 63 characters. The default value can be "gidNumber" or "uSNCreated", where:

  • "gidNumber" when type=? is set to LDAP.
  • "uSNCreated" when type=? is set to AD.

group_name_attr=?

Attribute of a user group name.

The value contains 1 to 63 characters. The default value can be "cn" or "sAMAccountName", where:

  • "cn" when type=? is set to LDAP.
  • "sAMAccountName" when type=? is set to AD.

group_member_attr=?

Attribute of a user group member name.

The value contains 1 to 63 characters. The default value can be "uniqueMember" or "member", where:

  • "uniqueMember" when type=? is set to LDAP.
  • "member" when type=? is set to AD.

user_objectclass=?

Name of a class to which a user belongs.

The value contains 1 to 63 characters. The default value can be "posixAccount" or "user", where:

  • "posixAccount" when type=? is set to LDAP.
  • "user" when type=? is set to AD.

group_objectclass=?

Name of a class to which a user group belongs.

The value contains 1 to 63 characters. The default value can be "groupOfUniqueNames" or "group", where:

  • "groupOfUniqueNames" when type=? is set to LDAP.
  • "group" when type=? is set to AD.

server_id

ID of a domain authentication server.

The value is an integer from 0 to 3. To obtain the value, run "show ldap configuration".

Level

Super administrator

Usage Guidelines

  • The domain authentication server information configured on the storage system must be the same as that configured on the server. Otherwise, the domain authentication function of the domain server cannot be used.
  • To ensure data transfer security, you are advised to use SSL encryption.
  • If no domain server ID is specified, the default ID is 0.

Example

Modify the configuration information about domain authentication server "3", where SSL encryption will be enabled, updated password for the bound DN is "7654321", the updated path under which user groups will be searched for is "ou=newpath", and the ID of the updated employed port is "4320".

admin:/>change ldap configuration over_ssl=yes bind_password=****** group_search_path=ou=newpath port=4320 server_id=3 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 234835

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next