No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication_vstore local_vstore_port_status

change remote_replication_vstore local_vstore_port_status

Function

The change remote_replication_vstore local_vstore_port_status command is used to set the deactivation status of all logical ports of the local vStore.

Format

change remote_replication_vstore local_vstore_port_status vstore_pair_id=? port_status=?

Parameters

Parameter

Description

Value

vstore_pair_id

Remote replication vStore ID.

To obtain the value, run the "show remote_replication_vstore general" command.

port_status

Port status of the local vStore.

The value can be "active" or "inactive".

Level

Administrator

Usage Guidelines

None

Example

  • For the local vStore in the remote replication vStore pair whose ID is 9017acaf20050000, set the status of the port to active.
    admin:/>change remote_replication_vstore local_vstore_port_status vstore_pair_id=9017acaf20050000 port_status=active 
    DANGER: You are about to deactivate all the logical ports of the local vStore of the remote replication vStore pair. This operation will cause service interruption or cause service exceptions. 
    Suggestion: Before you perform this operation, determine whether the modification is necessary. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • For the local vStore in the remote replication vStore pair whose ID is 9017acaf20050000, set the status of its port to inactive.
    admin:/>change remote_replication_vstore local_vstore_port_status vstore_pair_id=9017acaf20050000 port_status=inactive 
    DANGER: You are about to deactivate all the logical ports of the local vStore of the remote replication vStore pair. If the logical port of the remote vStore is in the active state, this operation will cause service interruption and IP conflict. 
    Suggestion: Before performing this operation, confirm that the attribute of the forcibly deactivated remote port of the remote replication vStore pair is Yes and all logical ports of the remote vStore are in the inactive state. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 227991

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next