No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port ip

show port ip

Function

The show port ip command is used to query the IP addresses of Ethernet ports (including iSCSI host ports , maintenance network ports and management network ports).

Format

show port ip [ eth_port_id=? ]

Parameters

Parameter

Description

Value

eth_port_id=?

ID of an Ethernet port.

To obtain the value, run "show port general".

Level

Guest

Usage Guidelines

  • IP addresses are of two types: IPv4 and IPv6.
  • To query the IP addresses of all Ethernet ports, run show port ip.
  • To query the IP addresses of a specific Ethernet port, run show port ip eth_port_id=?.

Example

Query the IP addresses of the Ethernet port whose ID is "ENG0.A2.P0". The ID and output vary depending on a specific product.

admin:/>show port ip eth_port_id=ENG0.A2.P0 
-----------------Host_Port----------------- 

Port ID : ENG0.A2.P0 
Type : Host Port 
IPv4 Address : 10.10.10.11 
Subnet Mask : 255.255.255.0 
IPv4 Gateway : -- 
IPv6 Address : -- 
IPv6 Prefix Length : -- 
IPv6 Gateway : --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Port ID

Port ID.

Type

Port type.

IPv4 Address

IPv4 address of the port.

Subnet Mask

Subnet mask of the port.

IPv4 Gateway

IPv4 gateway of the port.

IPv6 Address

IPv6 address of the port.

IPv6 Prefix Length

Length of the IPv6 prefix.

IPv6 Gateway

IPv6 gateway.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 228137

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next