No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_domain general

delete hyper_metro_domain general

Function

The delete hyper_metro_domain general command is used to delete a HyperMetro domain.

Format

delete hyper_metro_domain general domain_id=? [ is_local_delete=? ]

Parameters

Parameter

Description

Value

domain_id=?

ID of the HyperMetro domain.

Run the "show hyper_metro_domain general" command to obtain the value.

is_local_delete=?

Whether to delete the domain from the local device.

The value is "yes" or "no", where:

  • "yes": to delete the domain from the local device.
  • "no": not to delete the domain from the local device.

The default value is "no".

Level

Administrator

Usage Guidelines

None

Example

To delete HyperMetro domain "1", run the following command.

admin:/>delete hyper_metro_domain general domain_id=1 
WARNING: You are going to delete a HyperMetro domain. 
This operation may result in abnormal status of HyperMetro pairs in the HyperMetro domain. 
Suggestion: Before performing this operation, ensure that no service is using the HyperMetro domain to prevent service exceptions. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 228610

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next