No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change on_access_scan general

change on_access_scan general

Function

The change on_access_scan general command is used to modify On-Access scanning settings.

Format

change on_access_scan general id=? { scan_policy_id=? | scan_enabled=? }

Parameters

Parameter

Description

Value

id=?

ID of the On-Access scanning task.

To obtain the value, run the "show on_access_scan general" command.

scan_policy_id=?

Scanning policy ID of an On-Access scanning task.

To obtain the value, run the "show antivirus_scan policy" command.

scan_enabled=?

Whether to enable On-Access scanning.

Possible values are "yes" and "no", where:

  • "yes": to enable On-Access scanning.
  • "no": to disable On-Access scanning.

Level

Administrator

Usage Guidelines

  • Before running this command, ensure that the system is running correctly.
  • Before running this command, ensure that the Anti-Virus module is running correctly.

Example

Change the scanning policy of scanning task "0" to scanning policy "2" and set the On-Access scanning switch to "no".

admin:/>change on_access_scan general id=0 scan_policy_id=2 scan_enabled=no 

Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 227963

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next