No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add port_group port

add port_group port

Function

The add port_group port command is used to add ports to a port group. The ID varies depending on a specific product.

Format

add port_group port { port_group_id=? | port_group_name=? } port_type=? port_id_list=?

Parameters

Parameter

Description

Value

port_group_id=?

ID of a port group to which you want to add ports.

To obtain the value, run "show port_group general".

port_group_name=?

Name of a port group to which you want to add ports.

To obtain the value, run "show port_group general".

port_type=?

Type of a port that you want to add.

The value can be "FC", "ETH", "FCoE", or "IB", where:

  • "FC": indicates Fibre Channel ports.
  • "ETH": indicates ETH ports.
  • "FCoE": indicates FCoE ports.
  • "IB": indicates IB ports.

port_id_list=?

ID of a port that you want to add.

  • To obtain the value, run "show port general".
  • When multiple ports need to be added, separate these port IDs with commas (,).

Level

Administrator

Usage Guidelines

None

Example

  • Add port "ENG0.A2.P2" whose type is "ETH" to port group "0".
    admin:/>add port_group port port_group_id=0 port_type=ETH port_id_list=ENG0.A2.P2 
    Add port ENG0.A2.P2 to port group successfully.
  • Add port "ENG0.A2.P2" whose type is "ETH" to port group "portgroup1".
    admin:/>add port_group port port_group_name=portgroup1 port_type=ETH port_id_list=ENG0.A2.P2 
    Add port ENG0.A2.P2 to port group successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 225769

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next