No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 V3 Series V300R006

This document is applicable to OceanStor 18500 V3 and 18800 V3. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show failover_group fc_port

show failover_group fc_port


The show failover_group fc_port command is used to query the FC ports in a failover group on the storage system.


show failover_group fc_port failover_group_id=?






Indicates the ID of the failover group.

The value is an integer between 0 and 8191.



Usage Guidelines

You can use the "show failover_group fc_port failover_group_id=?" command to query the FC ports in a specified failover group.


To query the FC ports in failover group 0, run the following command.

 admin:/>show failover_group member failover_group_id=1 
  ID          Health Status  Running Status  Working Rate(Mbps)  WWN               Role         Working Mode  Configured Mode 
  ----------  -------------  --------------  ------------------  ----------------  -----------  ------------  --------------- 
  CTE0.A3.P1  Normal         Link Down       --                  22092cab00ba3431  INI and TGT  --            Auto-Adapt      
  CTE0.A3.P2  Normal         Link Down       --                  220a2cab00ba3431  INI and TGT  --            Auto-Adapt  

System Response

The following table describes the parameter meanings.




ID of a port.

Health Status

Health status of a port.

Running Status

Running status of a port.

Working Rate(Mbps)

Work speed of a port.


WWN of a port.


Role of a port in the link.

Working Mode

Working mode of a port.

Configured Mode

Configured mode of a port.

Updated: 2019-07-12

Document ID: EDOC1000138390

Views: 234446

Downloads: 150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next