No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
maint_debug_cli

maint_debug_cli

Function

The maint_debug_cli command is used to locate faults onsite and can only be used by administrators.

Format

maint_debug_cli

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

  • Entering the debugging mode.
    administrator@SMM_3U / # maint_debug_cli  
    ************************************************************************* 
    Debug Shell  
    Copyright(C) 2013-2018 
    ************************************************************************* 
    ~ 
    ~ 
    ~ 
    %
  • Saving the current debugging log export mode and level settings and making the settings valid after the BMC is restarted.
    % save 
    Success 
    %
  • Changing the debugging log export level of an attached module.
    %dloglevel 
    Success
  • Connecting to a specified module for follow-up operation.
    % attach ipmi_app 
    Success
  • Obtaining help information.
    % help 
    Usage: help 
    Get all command help infomation. 
    Usage: bye 
    Quit maintain debug command line interface. 
    Usage: attach  
    Attach certain module to debug. 
    Usage: regwrite  
    Write value to specified offset in cpld. 
    Usage: regread  
    Read value at specified offset in cpld. 
    Usage: lsmod 
    List all module names. 
    %
  • Exiting the debugging mode.
    % bye 
    Byebye. See you next time.
  • Listing the currently available function modules.
    % lsmod 
    uart Frameboard FileManage cooling MaintDebug MPA_IPMI_APP asd Fru_Fan ipmi_app dfm  
    fault_info Fru_IOCard PowerFru Ear diagnose sysctrl User Upgrade Sensor SMMmgt Led  
    BBU FanCell Board log

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 603214

Downloads: 691

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next