No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain auto_stripe_verify

change disk_domain auto_stripe_verify

Function

The change disk_domain auto_stripe_verify command is used to enable or disable the automatic stripe verification function of a disk domain.

Format

change disk_domain auto_stripe_verify disk_domain_id=? switch=?

Parameters

Parameter

Description

Value

disk_domain_id=?

ID of the disk domain whose automatic stripe verification function needs to be enabled or disabled.

To obtain the value, run the "show disk_domain general" command on the CLI.

switch=?

Switch for enabling or disabling the automatic stripe verification function of a disk domain.

The value can be "on" or "off", where:

  • "on": enables the automatic stripe verification function of a disk domain.
  • "off": disables the automatic stripe verification function of a disk domain.

Views

Developer view

Usage Guidelines

None

Example

Disable the automatic stripe verification function of a disk domain.

developer:/>change disk_domain auto_stripe_verify disk_domain_id=0 switch=off 
WARNING: You are about to disable the automatic stripe verification for a disk domain. After this function is disabled, the disk domain will not automatically verify stripe consistency, which may reduce system reliability.  
Suggestion: Before running this command, confirm that you want to disable the automatic stripe verification function for the disk domain. 
Have you read warning message carefully?(y/n)y 
Command executed successfully. 
developer:/>

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 640134

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next