No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spaceflow showcount

spaceflow showcount


The spaceflow showcount command is used to show statistics on I/Os related to the flow control.


spaceflow show




Diagnostic view

Usage Guidelines



Show statistics on I/Os related to the flow control.

admin:/diagnose>spaceflow showcount 
SpaceFlow count info: 
           name  count            callb            bad 
         phase1  333793363        333793363        0 
         phase2  0                0                0 
         phase4  92               92               0 
       checkDmn  303465           303465           0 
          event  0                0                0 
 free arrive  0                0                0 
     max arrive  69               0                0 
grain max arrive 0                0                0 
 cacheLe arrive  0                0                0 
 metaPer arrive  0                0                0 
Flowclose        68               0                0 
Through          0                0                0 
FiThrough        0                0                0 
BeginTransfer 0                0                0 
Push             23               0                0 
EndThrough       0                0                0

System Response

The following table describes the parameter meanings.




Phase 1 flow control.


Phase 2 flow control.


Phase 4 flow control.


DMN resource check.


Flow control event.

free arrive

Count of closing transactions when the release water level is reached.

max arrive

Count of closing transactions when the dirty data water level is reached.

grain max arrive

Count of closing transactions when the grain water level is reached.

cacheLe arrive

Count of closing transactions when the cache water level is reached.

metaPer arrive

Count of closing transactions when the metadata water level is reached.


Count of applying the transaction again after flow control.


Count of transactions that are in write through mode.


Count of transactions that are switched from the write back mode to write through mode.


Count of forcibly closing the current transaction.


Count of closing the current transaction during forcible disk flushing.


Count of forcibly closing the specific transaction.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 637661

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next