No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_snap_control task

show fs_snap_control task


The show fs_snap_control task command is used to view specific steps for executing a specific file system snapshot command.


show fs_snap_control task task_id=? controller=?






ID of a task to be queried.

To obtain the value, run the "show fs_snap_control all_task_info" command.


ID of a controller.

To obtain the value, run "show controller general".


Developer view

Usage Guidelines

Before performing this operation, check whether the file system snapshot task ID to be queried is correct.

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


Query steps for executing a file system snapshot command by using the task ID and specifying the controller.

developer:/>show fs_snap_control task taskid=3 controller=0A 
Time Action Result 
------------------- -------------------------- ------ 
2015-04-30 01:28:08 CREATE TASK OK 
2015-04-30 01:28:08 SNAP_ACTION_FS_COUNT INIT 
2015-04-30 01:28:08 SNAP_ACTION_FS_COUNT OK 
2015-04-30 01:28:08 SNAP_ACTION_FS_GETBATCH OK 
2015-04-30 01:28:08 SNAP_ACTION_FS_FUZZY_QUERY OK 
2015-04-30 01:28:08 SNAP_ACTION_FS_TASK_OVER OK 
2015-04-30 01:28:08 FINISH OK

System Response

The following table describes the parameter meanings.




Task end time.


Task step.


Execution result.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638092

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next