No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change verify_stripe config

change verify_stripe config

Function

The change verify_stripe config command is used to set the maximum number of I/O concurences of LUN stripe verification.

Format

change verify_stripe config thick_io_num=? thin_io_num=?

Parameters

Parameter

Description

Value

thick_io_num=?

Indicates the maximum number of I/O concurrences in thick LUN stripe verification.

The value ranges from 1 to 32.

thin_io_num=?

Indicates the maximum number of I/O conncurrences in thin LUN stripe verification. If the number of front-end concurrences execceds 2048, the value is 128, otherwise, it is 64.

The value ranges from 1 to 128.

Views

Developer view

Usage Guidelines

This command is applicable only to the local controller.

Example

To set the maximum number of I/O concurreces of the thick LUN and thin LUN stripe verification on the controller to 16, run the following command:

developer:/>change verify_stripe config thick_io_num=16 thin_io_num=16 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 608710

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next