No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_takeover enhance_switch

change lun_takeover enhance_switch


The change lun_takeover enhance_switch is used to set the enhanced masquerading switch of a specified LUN.


change lun_takeover enhance_switch lun_id=? switch=?






Takeover LUN ID.

To obtain the value, run "show lun_takeover general" without parameters.


Enhanced switch.

The value can be "on" or "off", where:

  • "on": enables the third-party LUN's enhanced masquerading switch.
  • "off": disables the third-party LUN's enhanced masquerading switch.


Developer view

Usage Guidelines



Set the enhanced masquerading switch of a specified LUN.

developer:/>change lun_takeover enhance_switch lun_id=0 switch=on 
DANGER: You are about to set the enhanced masquerading switch of third-party masquerading LUNs. This operation will change the masquerading information of the third-party masquerading LUN. Ensure that the third-party masquerading LUN is not mapped to the host. If this function is enabled or disabled on the mapped third-party masquerading LUN, service continuity may be influenced. If the masquerading LUN has been configured with HyperMetro, run the same command on the peer array of the HyperMetro LUN.  
Suggestion: Ensure that the third-party masquerading LUN is not mapped to the host. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 641508

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next