No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show root_cause_alarm rule

show root_cause_alarm rule

Function

The show root_cause_alarm rule command is used to view rules defined in a root cause alarm rule table.

Format

show root_cause_alarm rule [ rule_id=? ]

Parameters

Parameter

Description

Value

rule_id=?

ID of a rule in the root cause alarm rule table.

The value must be an integer from 1 to 400.

Views

Developer view

Usage Guidelines

None

Example

  • View all root cause alarm rules.
    developer:/>show root_cause_alarm rule 
    ID  Child ID        Delay Time Recover Time Fathers ID                     Relations                  Switch  Is Default 
      --  --------------  -----------  -------------  -----------------------------  -------------------------  ------  ---------- 
      1 0xF0015001A     120          120            0xF0060004                     (1=3,2=4,5=6,6=7)          on      yes 
      2 0xF0015001A     120          120            0xF0D10005                     (0=3,1=4,3=6)              on      yes 
      3 0xF0015001A     120          120            0xF0D1000A                     (0=3,1=4,3=6)              on      yes 
      4 0x200F00C90115  240          420            0x200F00C90114,0x200F00C90131  (1=2)(3=4)                 on      no 
      5 0xF00CF0014     120          120            0xF0CF0006                     (0=0,1=1,2=2)              on      yes
  • View a specific root cause alarm rule.
    developer:/>show root_cause_alarm rule rule_id=4 
      ID            : 4 
      Child ID      : 0x200F00C90115 
      Delay Time : 240 
      Recover Time  : 420 
      Fathers ID : 0x200F00C90114,0x200F00C90131 
      Relations     : (1=2)(3=4) 
      Switch        : on 
      Is Default : no

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Rule ID.

Child ID

Child alarm ID in the rule.

Delay Time

Maximum latency of child alarm suppression in the rule.

Recover Time

Maximum latency of child alarm recovery after parent alarms are cleared.

Fathers ID

List of parent alarm IDs in the rule.

Relations

Parent and child alarm association parameter in the rule.

Switch

Switch of making an alarm take effect in the rule.

Is Default

Whether the alarm employs the default rule. The default rule cannot be deleted.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 633378

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next