No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
upgradesystem

upgradesystem

Function

The upgradesystem command is used to upgrade a system when the system fails to be started.

Format

upgradesystem

Parameters

None

Modes

Minisystem mode

Usage Guidelines

Run this command at any node of the engine to complete the upgrade of the engine. Run this command on each engine of multi-engine devices. If a success message is returned for the command execution on each engine, power off and then power on all controllers.

Example

Run the command and type the package name as prompted to upgrade the system.

Storage: minisystem> upgradesystem 
Make sure you have uploaded package to /home/permitdir/update_disk 
Input package name:STLOSCA0E2.20.01.108.T02.tgz 
DANGER: You are going to upgrade the storage system. 
Suggestion: After a success message is displayed on the node, power off and then power on the device. 
Have you read danger alert message carefully?(y/n) 
y 
Are you sure you really want to perform the operation?(y/n) 
y 
Upgrade success 

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 630554

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next