No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showcls

sys showcls

Function

The sys showcls command is used to view cluster information.

Format

sys showcls

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View cluster information.

admin:/diagnose>sys showcls 
mode : normal 
status : none 
node cfg : 2 
node max : 4 
group cfg : 1 
group max : 2 
product : 0 
serial : 210235G6KDZ0B5000001 
WWN : 0x21000022a105b8bd 
local node id : 0 
normalNodeBitmap : 3 
faultNodeBitmap : 0 
offlineNodeBitmap: 0 
standbyNodeBitmap: 0 
id                      role                 status              group            engine 
-------------------- -------------------- -------------------- -------------------- -------------------- 
0 master normal 0 0 
1 slave1 normal 0 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

local node id

Local node ID.

normalNodeBitmap

Bitmap of the node whose status is normal.

id

Node ID.

role

Node role.

status

Node status.

group

ID of the group where the node belongs.

engine

ID of the engine where the node belongs.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 608699

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next