No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change vm_container general

change vm_container general


The change vm_container general command is used to modify a virtual machine (VM) container.


change vm_container general container_id=? cpu_isolate_enable=? [ cpu_counts=? ]






ID of the VM container.

To obtain the value, run the "show vm_container general" command without parameters.


Switch of the CPU isolation switch of the VM container.

The value can be "yes" or "no", where:

  • "yes": enables physical CPU allocation to VMs.

"no": disables physical CPU allocation to VMs.


Number of CPUs of the VM container.

The value is an integer ranging from 1 to 32.


Developer view

Usage Guidelines

OceanStor 5300 V3 (16 GB), 5500 V3 (24 GB), 5600 V3 (32 GB), 5800 V3 (64 GB)do not support this command.

OceanStor 5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


  • Change the number of reserved CPUs for a VM container.
    developer:/>change vm_container general container_id=0 cpu_isolate_enable=yes cpu_counts=1 
    Command executed successfully.
  • Change the status of the CPU isolation switch for a VM container.
    developer:/>change vm_container general container_id=0 cpu_isolate_enable=no 
    Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 637648

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next