No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The uboot_cp0 command is used to copy U-Boot to flash.






serial port mode

Usage Guidelines



Copy U-Boot to flash.

Hi1710_UBOOT> uboot_cp0                                                                                                              
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the  
PCB cannot work normally.                                                                                                            
erase flash from :40000000 to :4007ffff,please wait a while                                                                          
- Warning: 4 protected sectors will not be erased!                                                                                   
Erased 4 sectors                                                                                                                     
Copy u-boot to flash,please wait a while                                                                                             
 Clean env from flash,please wait a while                                                                                            
 erase flash from :401e0000 to :401fffff,please wait a while                                                                         
- Warning: 1 protected sectors will not be erased!                                                                                   
Erased 1 sectors                                                                                                                     
Protect Flash Sectors 0-15 in Bank # 1                                                                                               

Success to load u-boot0.please update uboot0 and uboot1 in a uboot update process.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 632368

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next