No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_pair isolation_para

change hyper_metro_pair isolation_para

Function

The change hyper_metro_pair isolation_para command is used to modify HyperMetro storage array isolation parameters.

Format

change hyper_metro_pair isolation_para pair_id=? { isolation_cyclenumber=? | isolation_cyclelenth=? } *

Parameters

Parameter

Description

Value

pair_id=?

ID of the HyperMetro pair.

Run the "show hyper_metro_pair general" command without any parameters to obtain the value.

isolation_cyclenumber=?

Isolation cycle.

The value ranges from 5 to 60. The default value is "40".

isolation_cyclelenth=?

Isolation period length.

The value ranges from 2 seconds to 12 seconds. The default value is "6s".

Views

Developer view, vstore developer view

Usage Guidelines

OceanStor 2100 V3/6800 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

Change the isolation period of HyperMetro pair "1" to "20".

developer:/>change hyper_metro_pair isolation_para pair_id=1 isolation_cyclenumber=20 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 605103

Downloads: 693

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next