No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
export file_system dirtydata

export file_system dirtydata

Function

The export file_system dirtydata command is used to export the dirty data in an offline file system. Run the "show file_system dirtydata" command to check the data exporting status and directory.

Format

export file_system dirtydata filesystem_id=? backup_filesystem_id=?

Parameters

Parameter

Description

Value

filesystem_id=?

File system ID. ID of the file system whose dirty data needs to be exported.

To obtain the value, run the "show file_system general" command.

backup_filesystem_id=?

File system ID. ID of the file system where the dirty data is saved.

To obtain the value, run the "show file_system general" command.

Views

Developer view

Usage Guidelines

  • This command can export the dirty data in an offline file system only to a specific file system. The two file systems must be in the same storage system.
  • The system automatically generates a file path to save the dirty data. You can run the "show file_system dirtydata" command to check the file path.
  • You are advised to create a new file system to save the dirty data.
  • OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/2600 V3 for Video/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

To export the dirty data in file system 1 to file system 2, run the following command:

developer:/>export file_system dirtydata filesystem_id=1 backup_filesystem_id=2 
Command executed successfully. 

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 631277

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next