No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear omnilock brl

clear omnilock brl

Function

The clear omnilock brl command is used to clear information about file range locks.

Format

clear omnilock brl controller=? [ file_system_id=? ] [ file_id=? ] [ range=? ] [ owner=? ]

Parameters

Parameter

Description

Value

file_system_id=?

File system ID.

The value is a hexadecimal number, ranging from 0 to FFFFFFFF FFFFFFFF.

file_id=?

File ID.

The value is a hexadecimal number, ranging from 0 to FFFFFFFF FFFFFFFF.

owner=?

Owner of a range lock.

The value can be "SMB1", "SMB2", "NFS3", "NFS4", "PIM", or "SCA", where:

  • "SMB1": SMB1.0.
  • "SMB2": SMB2.0.
  • "NFS3": NFS v3.
  • "NFS4": NFS v4.
  • "PIM": PIM module.

range=?

Range of a range lock.

The value is a decimal number, ranging from 0 to (2^64-1).The value format is "X-Y",for example,"0-100" or "80-90".

controller=?

Controller ID.

The value format is "XA", "XB", "XC", or "XD". "X" is an integer ranging from 0 to 3, for example, "0A" or "1C".

Views

Developer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

Clear information about file range locks.

developer:/>clear omnilock brl controller=0A 
WARNING: You are about to run the command of clearing the block range lock. This operation may interrupt NAS services. 
Suggestion: Confirm that you need to clear the block range lock. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 636346

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next