No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system isolate_object

change file_system isolate_object


The change file_system isolate_object command is used to delete object isolate switch.


change file_system isolate_object isolate_switch=? controller=? file_system_id=? object_id=?






object isolate switch.

The value is off.


Indicates the owning controller of the file system.

The value is in the format of XA or XB or XC or XD.X can be 0 to 3.


Object ID.

The value ranges from 1 to 230584300921369395.


File system ID.

The value ranges from 0 to 65535.


Developer view

Usage Guidelines

  • Before running this command, check that you have selected the correct file system and the correct controller.
  • You must enter the controller ID, file system ID, object id.
  • OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


To delete isolate flag of the object.

developer:/change file_system isolate_object isolate_switch=off controller=0A file_system_id=0 object_id=4002 
Command executed successfully. 

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638225

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next