No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tcp_recycle_switch.sh

tcp_recycle_switch.sh

Function

The tcp_recycle_switch.sh command is used to enable or disable the function of rapidly recycling the TIME_WAIT socket in the TCP connection.

Format

tcp_recycle_switch.sh [-h] [on|off]

Parameters

None

Modes

Minisystem mode

Usage Guidelines

None

Example

  • Enable the function of rapidly recycling the TIME_WAIT socket in the TCP connection.
    Storage: minisystem> tcp_recycle_switch.sh on 
    Command executed successfully.
  • Disable the function of rapidly recycling the TIME_WAIT socket in the TCP connection.
    Storage: minisystem> tcp_recycle_switch.sh off 
    WARNING: You are about to disable the function of rapidly recycling the TIME_WAIT socket in the TCP connection. After this function is disabled, if the service end closes large amount of TCP connections during a short period, new connections cannot be created for a certain period. 
    Suggestion: After this function is disabled, turn on the switch again after related operations. 
    Have you read warning message carefully?(y/n) 
    y 
    Are you sure you really want to perform the operation?(y/n) 
    y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 604295

Downloads: 691

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next