No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrm showreclaimtask

mrm showreclaimtask

Function

The mrm showreclaimtask command is used to view the reclaim task status of disk domain.

Format

mrm showreclaimtask -p poolId

Parameters

Parameter

Description

Value

poolId

Disk domain ID.

The value ranges from 0 to n minus one, where n indicates the maximum number of disk domains supported by a product.

Views

Diagnostic view

Usage Guidelines

None

Example

View the reclaim task status of disk domain 0.

admin:/diagnose>mrm showreclaimtask -p 0 
Disk Domain ID                : 0 
Begin Time                    : 2016-03-25 14:50:42  
End Time                      : 2016-03-25 14:50:42 
Running                       : 0 
HistoryRun                    : 1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Disk Domain ID

Disk domain ID.

Begin Time

Start time of the reclaim task.

End Time

End time of the reclaim task.

Running

Is there a reclaim task being performed.

HistoryRun

Whether there is a history of reclaim task.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 611796

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next