No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show space apo_info

show space apo_info


The show space apo_info command is used to batch query entrys from a specified APO object.


show space apo_info object_set_id=? object_id=? controller=? [ count=? ] [ position=? ]






Indicates the object set ID.

The value is the sum of the file system ID and the base object set ID. The base object set ID of the file system is "0x4000000000" (in hexadecimal) = "274877906944" (in decimal). The MOS base object set ID is "0x2000000000" (in hexadecimal) = "137438953472" (in decimal). The DCL base object set ID is "0x5000000000" (in hexadecimal) = "343597383680" (in decimal). For example, if the file system ID is "20", the object set ID of the file system = "0x4000000000" + "20".


Indicates the object ID.

The value must be greater than "0", and smaller than "2305843009213693952".


Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Indicates the count of entry to show.

The value must be greater than "0", and smaller than "1025".


Indicates the start position of the query operation.

To obtain the value, run the "show space apo_info" command.


Developer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


To query the all entrys of object "3" in the object set "274877906944", run the following command.

developer:/>show space apo_info object_set_id=274877906944 object_id=3 controller=0A 

  Key                                       Value  Position          
  ----------------------------------------  -----  --------------- 
  test                                      4008 281474976710656 
  .snapshot                                 9      308805193445377 
  qtree                                     4001 329632487481345 
  AT_Struct.ini                             4035 334285372065793 
  AT_Log.log                                4009 358199334008833 
  ATC_20150731165214_1                      4011 384960586647553

System Response

The following table describes the parameter meanings.




Indicates key of the entry.


Indicates value of the entry.


Indicates position of the entry.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 632378

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next