No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rephc showAllPairLockInfo

rephc showAllPairLockInfo

Function

The rephc showAllPairLockInfo command is used to query the lock information about all HyperMetro pairs.

Format

rephc showAllPairLockInfo [startIndex]

Parameters

Parameter

Description

Value

startIndex

Index of the start pair ID.

  • To obtain the value, run the "show hyper_metro_pair general" and "rephc showluntopair lun_id" commands.
  • The default value is "0".

Views

Diagnostic view

Usage Guidelines

OceanStor 6800 V3/2600 V3/2200 V3 (8 GB memory per controller)/5300 V3/2200 V3 (16 GB memory per controller)/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

Run the command to query the lock information about all HyperMetro pairs.

admin:/diagnose>rephc showAllPairLockInfo 
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Lock key

ID of a HyperMetro pair lock.

Is Locked

Lock status of a HyperMetro pair lock.

Lock time

Time of the last successful lock.

Lock function

Name of the last succesful lock's function.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138402

Views: 449191

Downloads: 644

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next