No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvsascbb getroutelist

drvsascbb getroutelist

Function

The drvsascbb getroutelist command is used to obtain routing table information about expanders, excluding direct routing information.

Format

drvsascbb getroutelist card_id=? port_id=? sasaddrhi=? sasaddrlo=? startrouteindex=?

Parameters

Parameter

Description

Value

card_id=?

Slot ID of a SAS interface module.

The value is an integer ranging from "0" to "11".

port_id=?

Port ID of a SAS interface module.

To obtain the value, run "drvsascbb showdevinfo".

sasaddrhi=?

High 16 bits of the SAS address of the specified disk enclosure.

To obtain the value, run "drvsascbb showdevinfo".

sasaddrlo=?

Low 16 bits of the SAS address of the specified disk enclosure.

To obtain the value, run "drvsascbb showdevinfo".

startrouteindex=?

Start index of a routing table.

The value is an integer ranging from "0" to "550".

Views

Diagnostic view

Usage Guidelines

None

Example

Obtain routing table information about expanders, excluding direct routing information.

admin:/diagnose>drvsascbb getroutelist card_id=8 port_id=0x1f8800 sasaddrhi=0x50011111 sasaddrlo=0x1111103f startrouteindex=0 
expander 0x500111111111103f route table info: 
expander changecnt: 10522 routetable changecnt: 3 first route Index: 0 last route Index: 4 descriptor num: 5 startphyid: 0  
Index: 0   route sasaddr: 0x522223333444443e zonegroup: 0 phy bitmap: 0xf0000000  
Index: 1     route sasaddr: 0x50022a1060708181 zonegroup: 0 phy bitmap: 0xf0000000  
Index: 2     route sasaddr: 0x50022a1060708281 zonegroup: 0 phy bitmap: 0xf0000000  
Index: 3     route sasaddr: 0x50022a1060708381 zonegroup: 0 phy bitmap: 0xf0000000  
Index: 4     route sasaddr: 0x50022a1060708081 zonegroup: 0 phy bitmap: 0xf0000000

System Response

The following table describes the parameter meanings.

Parameter

Meaning

expander

SAS address of a disk enclosure.

route table info

Routing table information.

expander changecnt

Change times of a disk enclosure.

routetable changecnt

Change times of a disk enclosure's routing table information.

first route Index

First routing index.

last route Index

Last routing index.

descriptor num

Total index quantity.

startphyid

PHY ID of the PHY that is initially processed.

Index

Index.

route sasaddr

SAS address of a device.

zonegroup

Divided zone groups.

phy bitmap

Bitmap value of a PHY.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 612495

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next