No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change space check_space_consistency

change space check_space_consistency


The change space check_space_consistency command is used to open space consistency check.


change space check_space_consistency { file_system_id=? | lun_id=? } [ speed=? ] [ force=? ] [ range=? ] [ check_integrity=? ]






File system ID.

The value ranges from 0 to 65535.



The value ranges from 0 to 65535.



The value is "high" , "normal" or "low", where:

  • "high": high speed.
  • "normal": normal speed.
  • "low": low speed.


Forcible check tag.

The value is "no" or "yes", where:

  • "no": indicates that forcible repair will not be performed.
  • "yes": indicates that forcible repair will be performed.



The value is "all" , "meta" or "data", where:

  • "all": all.
  • "meta": metadata.
  • "data": data.


Check integrity tag.

The value is "no" or "yes", where:

  • "no": indicates that integrity check will not be performed.
  • "yes": indicates that integrity check will be performed.


Developer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/2600 V3 for Video/5500 V3/5600 V3/5800 V3 storage systems support this command.


To check the file system whose ID is "0", speed is "high", forcible check tag is "yes", range is "all", check integrity tag is "yes", run the following command.

developer:/>change space check_space_consistency file_system_id=0 speed=high force=yes range=all check_integrity=yes 
DANGER: You are about to check the file system or LUN. When performing this operation, note the following: 
1. During checking the file system or LUN, do not perform other operations on the storage system or the file system or the LUN. 
Suggestion: Confirm that you want to check the file system or LUN before running the command. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638787

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next